HARGA TERMURAH UPS 10KW KWALITAS TERBAIK
Berikut Spesifikasi Teknik UPS harga termurah dengan kwalitas terbaik dari RIELLO UPS TIPE MPT
EASY SOURCE
Master MPS makes powering UPS devices by power generators and MV/LV transformers easier and more efficient, reducing loss in systems and coils and correcting the power factor and eliminating harmonics by the loads powered by the UPS itself.
In addition to this, the progressive start-up of the rectifier and the possibility of reducing the recharge current of the batteries, allow for the containment of the input current absorbed and therefore do not overload the source, especially when the source is a generator.
BATTERY CARE SYSTEM: MAXIMUM BATTERY CARE
Normally the batteries are kept charged by the rectifier; when mains power fails, the UPS uses this energy source to power its utilities. Therefore, proper battery care is critical to ensuring correct UPS operation in emergency conditions.
Battery Care System consists of a series of features and capabilities that allow for battery management in order to obtain the best performance possible and extend their operating life.
Master MPS is also compatible with different battery technologies: vented open lead acid, VRLA AGM, Gel, NiCd, Flywheels, Supercaps and Lithium.
FLEXIBILITY
Master MPS is suited to all types of applications, from computers to the most demanding industrial environments.
Thanks to the broad range of accessories and options, complex architectures and configurations can be created to ensure maximum power to critical loads:
expansions (in redundancy or power) may be made in already-operating parallel systems, even without having to switch off any UPS that are already operating and thus, maintaining power to utilities.
MAXIMUM RELIABILITY AND AVAILABILITY
Distributed or centralised parallel up to 8 units per redundant (N+1) or powerparallel. A parallel between models with different power levels is possible. Maximum levels of availability also in the event of an interruption to the parallel bus cable: the system is “FAULT TOLERANT”.
It is not affected by connection cable faults and continues powering the load without a continuity solution, signalling the anomaly with an alarm.
OPTIONS
- UGS – UPS Group Synchroniser
Allows 2 or more non-parallel UPS devices to remain synchronised even during mains power failure. The UGS also enables a Riello UPS to be synchronised with another power source that is independent and of a different power rating. - PSJ – Parallel Systems Joiner
Allows two groups of UPS to be connected in parallel whilst operating, in the event of maintenance (with no interruption to the output), using a power coupling switch. Should one of the UPS in one of the parallel groups fail, it is automatically excluded.
The PSJ connects the remaining UPS, to the other parallel group via an external bypass, in order to continue to guarantee load redundancy.
SPECIFIC SOLUTIONS
The UPS can be adapted to meet your requirements. Contact TEC to discuss the feasibility of specific solutions and options not listed in the catalogue.
Main Features:
- Online double conversion
- IGBT inverter and output isolation transformer
- High reliability DSP control
- Wide input voltage range
- DC cold start function
- Full protection function
- Intelligent RS232 /RS485 communication port
- SNMP adapter (optional)
- Advanced no-master-slave parallel technology (optional)
- Intelligent battery monitors system – MMBM (optional)
Produk terkait :
– UPS 3/1 dengan isolasi trafo
– Battery untuk UPS Riello Aros
SENTRADAYA DOTCOM SUDAH BERPENGALAMAN 20 TAHUN BIDANG CATUDAYA DENGAN MENJADI DISTRIBUTOR PRODUK – PRODUK SEBAGAI BERIKUT :
CARA MENDESAIN PLTS ON GRID?
MENCARI UPS TERBAIK ?
HARGA BATERAI UPS YANG BAGUS?
WORKSHOP DAN KANTOR
PERGUDANGAN KENCANA TROSOBO BLOK B7
JLN RAYA TROSOBO KM 23 TAMAN SIDOARJO
tolong info harga dan spek untuk ups 10kva untuk daerah medan
terima kasih
kami sedang mengikuti tender, mohon info spek dan harga utk ups 10 kva